jb-omnichain-payout-limits – OpenClaw Skill

---

name: jb-omnichain-payout-limits description: | Omnichain projects have per-chain payout limits, not aggregate limits. This is a fundamental constraint with no perfect solution. Use when: (1) user wants a fixed total fundraising cap across chains, (2) asking about aggregate payout limits on omnichain projects, (3) designing omnichain projects with payout constraints, (4) exploring oracle or monitoring solutions for cross-chain state. Covers the limitation, why it exists, and practical approaches with tradeoffs.

Omnichain Payout Limit Constraints

Note: This applies to projects using payout limits (standard Juicebox projects with treasury distributions). Revnets don't use payout limits - they use unlimited surplus allowances for loans via REVLoans, so this limitation doesn't affect them.

The Problem

Payout limits in Juicebox V5 are per-chain, not aggregate.

When you deploy an omnichain project (linked via Suckers), each chain has its own independent payout limit. Setting a 10 ETH payout limit on a 5-chain project means you could potentially pay out 50 ETH total (10 ETH × 5 chains), not 10 ETH total.

┌─────────────────────────────────────────────────────────────────────┐
│  Omnichain Project with 10 ETH "Payout Limit"                       │
│                                                                     │
│  Chain 1 (Ethereum):  Limit = 10 ETH  →  Can pay out 10 ETH        │
│  Chain 2 (Optimism):  Limit = 10 ETH  →  Can pay out 10 ETH        │
│  Chain 3 (Base):      Limit = 10 ETH  →  Can pay out 10 ETH        │
│  Chain 4 (Arbitrum):  Limit = 10 ETH  →  Can pay out 10 ETH        │
│                                          ─────────────────         │
│                                          TOTAL: 40 ETH possible    │
│                                                                     │
│  User expectation: 10 ETH max                                       │
│  Reality: 40 ETH max                                                │
└─────────────────────────────────────────────────────────────────────┘

Why This Is Fundamentally Hard

Cross-chain state is asynchronous. There is no atomic way to know the aggregate raised/paid across all chains in real-time.

Any solution that coordinates cross-chain state introduces:

• Latency: Not real-time (seconds to minutes of delay)
• Trust assumptions: Who runs the oracle? Who can manipulate it?
• Manipulation windows: Attackers can exploit sync delays
• Gas costs: Cross-chain messaging is expensive
• Complexity: More moving parts = more failure modes

This is not a bug in Juicebox - it's a fundamental property of multi-chain systems.

Approaches

Approach 1: Accept & Design Around It

Best for: Projects where approximate limits are acceptable

Set per-chain limits that sum to your target, accepting that distribution may not match expectations.

// Goal: ~100 ETH total across 5 chains
// Strategy: 20 ETH limit per chain

// Each chain's ruleset config:
fundAccessLimitGroups: [{
    terminal: MULTI_TERMINAL,
    token: NATIVE_TOKEN,
    payoutLimits: [{
        amount: 20 ether,  // Per-chain limit
        currency: 1        // ETH
    }],
    surplusAllowances: []
}]

Tradeoffs:

• One chain might hit its limit while others have slack
• Total raised could be less than desired if distribution is uneven
• No coordination required - simplest approach

When to use:

• Soft caps (nice-to-have limits, not hard requirements)
• Projects where ~80-120% of target is acceptable
• Early-stage projects testing omnichain

---

Approach 2: Monitoring + Manual Pause

Best for: Projects with active operators who can respond quickly

Use Bendystraw to monitor aggregate raises, manually pause payments when approaching threshold.

const BENDYSTRAW_API = 'https://bendystraw.xyz/{API_KEY}/graphql';

// Query aggregate balance across all chains
async function getAggregateBalance(suckerGroupId: string) {
  const query = `
    query($id: String!) {
      suckerGroup(id: $id) {
        balance
        volume
        projects_rel {
          chainId
          balance
        }
      }
    }
  `;

  const data = await fetch(BENDYSTRAW_API, {
    method: 'POST',
    headers: { 'Content-Type': 'application/json' },
    body: JSON.stringify({ query, variables: { id: suckerGroupId } })
  }).then(r => r.json());

  return data.data.suckerGroup;
}

// Monitoring loop
async function monitorAndAlert(suckerGroupId: string, threshold: bigint) {
  const group = await getAggregateBalance(suckerGroupId);
  const balance = BigInt(group.balance);

  if (balance >= threshold * 90n / 100n) {
    // 90% of threshold - send alert
    console.log('ALERT: Approaching threshold, consider pausing');
  }

  if (balance >= threshold) {
    // At threshold - operator should pause
    console.log('THRESHOLD REACHED: Pause payments now');
    // Could trigger notification (email, Telegram, Discord webhook)
  }
}

Manual pause action:

// Project owner calls on each chain
await controller.queueRulesetsOf(projectId, [{
  // ... existing config
  metadata: {
    // ... existing metadata
    pausePay: true  // Disable new payments
  }
}]);

Tradeoffs:

• Requires active monitoring (someone watching)
• Reaction time matters - payments during delay
• Human error risk (forget to pause, pause wrong chain)
• Not suitable for trustless/autonomous projects

When to use:

• Projects with dedicated operators
• Lower stakes where brief overruns are acceptable
• Transitional approach while building automation

---

Approach 3: Automated Cron + Relayr

Best for: Projects wanting automation without full oracle complexity

A cron job monitors aggregate balance via Bendystraw, uses Relayr to pause payments across all chains when threshold approaches.

┌─────────────────────────────────────────────────────────────────────┐
│  Automated Threshold Monitor                                        │
│                                                                     │
│  ┌──────────────┐     ┌──────────────┐     ┌──────────────┐        │
│  │   Cron Job   │────►│  Bendystraw  │────►│  Check       │        │
│  │  (every 5m)  │     │    Query     │     │  Threshold   │        │
│  └──────────────┘     └──────────────┘     └──────┬───────┘        │
│                                                   │                 │
│                                    threshold met? │                 │
│                                                   ▼                 │
│  ┌──────────────────────────────────────────────────────────┐      │
│  │  Relayr Bundle: Pause payments on all chains             │      │
│  │                                                          │      │
│  │  Chain 1: queueRulesetsOf(projectId, {pausePay: true})  │      │
│  │  Chain 2: queueRulesetsOf(projectId, {pausePay: true})  │      │
│  │  Chain 3: queueRulesetsOf(projectId, {pausePay: true})  │      │
│  │  Chain 4: queueRulesetsOf(projectId, {pausePay: true})  │      │
│  └──────────────────────────────────────────────────────────┘      │
└─────────────────────────────────────────────────────────────────────┘

Implementation requirements:

1. Operator address: Needs QUEUE_RULESETS permission on each chain's project
2. Cron infrastructure: Reliable job runner (AWS Lambda, Cloudflare Workers, dedicated server)
3. Bendystraw API key: For querying aggregate state
4. Relayr integration: For multi-chain transaction bundling

// Simplified cron handler
async function checkAndPauseIfNeeded(config: {
  suckerGroupId: string;
  threshold: bigint;
  projectIds: { chainId: number; projectId: number }[];
  operatorKey: string;
}) {
  // 1. Check aggregate balance
  const group = await getAggregateBalance(config.suckerGroupId);
  const balance = BigInt(group.balance);

  if (balance < config.threshold) {
    return; // Under threshold, do nothing
  }

  // 2. Build pause transactions for each chain
  const pauseTxs = config.projectIds.map(({ chainId, projectId }) => ({
    chain: chainId,
    target: CONTROLLER_ADDRESSES[chainId],
    data: encodeFunctionData({
      abi: JB_CONTROLLER_ABI,
      functionName: 'queueRulesetsOf',
      args: [projectId, /* rulesetConfigs with pausePay: true */]
    }),
    value: '0'
  }));

  // 3. Submit via Relayr
  const bundle = await relayr.createBundle(pauseTxs);
  await relayr.payForBundle(bundle, config.operatorKey);

  console.log(`Paused payments across ${config.projectIds.length} chains`);
}

Tradeoffs:

• Latency: 5-minute cron + Relayr execution time = potential overshoot
• Trust: Operator key holder can act unilaterally
• Infrastructure: Requires running and maintaining a service
• Cost: Relayr fees + gas on all chains
• Reliability: Cron failures = missed threshold

When to use:

• Projects with some trust in a designated operator
• Soft caps where ~5-10% overshoot is acceptable
• Projects without resources for full oracle implementation

---

Approach 4: Oracle in Pay Hook

Best for: Projects requiring hard limits with strong guarantees

A pay hook checks an oracle for aggregate state before allowing payments. The oracle is updated by a relayer watching all chains.

┌─────────────────────────────────────────────────────────────────────┐
│  Oracle-Based Aggregate Limit                                       │
│                                                                     │
│  ┌─────────────────────────────────────────────────────────────┐   │
│  │  Oracle Contract (deployed on each chain)                    │   │
│  │  ├── aggregateBalance: uint256 (updated by relayer)         │   │
│  │  ├── threshold: uint256                                      │   │
│  │  └── lastUpdate: uint256 (timestamp)                        │   │
│  └─────────────────────────────────────────────────────────────┘   │
│                           ▲                                         │
│                           │ update                                  │
│  ┌────────────────────────┴────────────────────────────────────┐   │
│  │  Relayer Service                                             │   │
│  │  ├── Watches PayEvents on all chains                        │   │
│  │  ├── Calculates aggregate balance                           │   │
│  │  └── Updates oracle on all chains                           │   │
│  └─────────────────────────────────────────────────────────────┘   │
│                                                                     │
│  Pay Flow:                                                          │
│  User → pay() → PayHook.beforePayRecordedWith() → Oracle.check()   │
│                                                                     │
│  If oracle.aggregateBalance + payAmount > threshold:                │
│     REVERT "Aggregate limit exceeded"                              │
└─────────────────────────────────────────────────────────────────────┘

Implementation sketch:

// Oracle contract
contract AggregateBalanceOracle {
    uint256 public aggregateBalance;
    uint256 public threshold;
    uint256 public lastUpdate;
    address public relayer;

    function updateBalance(uint256 newBalance) external {
        require(msg.sender == relayer, "UNAUTHORIZED");
        aggregateBalance = newBalance;
        lastUpdate = block.timestamp;
    }

    function wouldExceedThreshold(uint256 additionalAmount) external view returns (bool) {
        return aggregateBalance + additionalAmount > threshold;
    }
}

// Pay hook that checks oracle
contract AggregateLimitPayHook is IJBPayHook {
    AggregateBalanceOracle public oracle;
    uint256 public maxStaleness = 5 minutes;

    function beforePayRecordedWith(JBBeforePayRecordedContext calldata context)
        external view override returns (uint256, uint256, uint256, JBPayHookSpecification[] memory)
    {
        // Check oracle freshness
        require(
            block.timestamp - oracle.lastUpdate() <= maxStaleness,
            "Oracle stale"
        );

        // Check aggregate limit
        require(
            !oracle.wouldExceedThreshold(context.amount.value),
            "Aggregate limit exceeded"
        );

        // Allow payment
        return (context.weight, context.newlyIssuedTokenCount, context.totalSupply, new JBPayHookSpecification[](0));
    }
}

Tradeoffs:

• Complexity: Multiple contracts + relayer service
• Latency: Oracle updates lag behind reality
• Staleness window: Payments during oracle delay can exceed limit
• Relayer trust: Single point of failure/manipulation
• Cost: Continuous relayer operation + oracle update gas
• UX: Payments can fail if oracle is stale or near threshold

When to use:

• Hard regulatory/compliance limits that must be enforced
• High-stakes projects where overshoot is unacceptable
• Projects with resources to build and maintain infrastructure

Current status: No off-the-shelf implementation exists. Would need custom development.

---

Approach 5: Single-Chain Treasury

Best for: Projects that can centralize treasury operations

Accept payments on all chains, but bridge all funds to a single "home" chain for treasury operations. Payout limit on home chain is the only one that matters.

┌─────────────────────────────────────────────────────────────────────┐
│  Single-Chain Treasury Pattern                                      │
│                                                                     │
│  Chain 1 (Home): Treasury lives here                               │
│  ├── Payout limit: 100 ETH (THIS IS THE REAL LIMIT)               │
│  ├── Accepts payments                                               │
│  └── All payouts happen here                                       │
│                                                                     │
│  Chain 2-4: Payment collection only                                │
│  ├── Payout limit: 0 (no direct payouts)                           │
│  ├── Accept payments                                                │
│  └── Funds bridged to Chain 1 via Suckers                          │
│                                                                     │
│  Flow:                                                              │
│  User pays on Chain 2 → Tokens issued on Chain 2                   │
│                       → User bridges funds to Chain 1 (manual)     │
│                       → Chain 1 treasury grows                     │
│                       → Payouts from Chain 1 only                  │
└─────────────────────────────────────────────────────────────────────┘

The blocker: Suckers require explicit user action to bridge. The project cannot automatically sweep funds from other chains to the home chain. Users must:

1. Call prepare() on the source chain
2. Wait for bridging
3. Call claim() on the destination chain

Potential workarounds:

• Incentivize users to bridge (bonus tokens, lower fees on home chain)
• Build a "sweeper" bot that bridges on behalf of users (requires trust + gas)
• Accept that some funds remain distributed

Tradeoffs:

• User friction: Extra steps to bridge funds
• Fragmentation: Funds spread across chains until bridged
• Complexity: Users must understand the pattern
• Cannot enforce: Can't force users to bridge

When to use:

• Projects where most activity naturally happens on one chain
• Projects willing to accept some treasury fragmentation
• Transitional approach for projects moving toward single-chain

---

Comparison Matrix

Approach	Enforcement	Latency	Trust Required	Complexity	Best For
Accept & Design	Soft	N/A	None	Low	Soft caps
Manual Monitoring	Soft	Minutes	Operator	Low	Active teams
Cron + Relayr	Soft	~5-10 min	Operator	Medium	Automation
Oracle Pay Hook	Hard*	Seconds	Relayer	High	Compliance
Single-Chain	Medium	N/A	None	Medium	Centralized ops

*Oracle enforcement has latency window during updates

---

Recommendations by Use Case

"We need a hard cap for regulatory compliance"

Answer: This is very difficult in omnichain. Consider:

1. Single-chain only (no omnichain)
2. Oracle pay hook (complex, custom development)
3. Accept that enforcement is approximate

"We want a fundraising goal but it's not legally binding"

Answer: Use Approach 1 (Accept & Design) or Approach 2 (Manual Monitoring)

• Set per-chain limits that sum to ~80% of your goal
• Monitor via Bendystraw
• Pause manually when approaching target

"We have an operator who can manage this"

Answer: Use Approach 3 (Cron + Relayr)

• Automate the monitoring and pausing
• Accept 5-10% potential overshoot
• Ensure operator key security

"We're building a revnet"

Answer: This limitation doesn't apply to revnets

• Revnets don't use payout limits - they use surplus allowances for loans (via REVLoans)
• Surplus allowances are unlimited by design (for loan collateral access)
• If you need aggregate fundraising caps on a revnet, see the oracle or monitoring approaches above

---

Future Considerations

Could Juicebox natively support aggregate limits?

Theoretically, but it would require:

1. Cross-chain messaging protocol: Native integration with bridges
2. Consensus on aggregate state: Which chain is source of truth?
3. Latency acceptance: Users accept payments may fail during sync
4. Cost distribution: Who pays for cross-chain messages?

This is a significant protocol-level change, not a simple feature add.

Could a shared oracle service exist?

Yes - a community-run oracle service could:

• Watch all Juicebox projects across chains
• Provide aggregate state queries
• Update on-chain oracles

This could be built as infrastructure, but requires:

• Ongoing operational funding
• Trust in the service operator
• Integration with pay hooks

---

Related Skills

• /jb-omnichain-ui - Building omnichain frontends
• /jb-suckers - Cross-chain token bridging mechanics
• /jb-bendystraw - Querying aggregate project data
• /jb-relayr - Multi-chain transaction bundling
• /jb-fund-access-limits - Per-chain payout limit configuration